• Combats cloudy water and leaves it sparkling.
• It combines the small particles that make the pool look dirty and that the filter is unable to retain, into slightly larger clots so that they are large enough to be caught by the filter, in an easy and safe way.

DIRECTIONS FOR USE:

• As a preventative: apply 30 ml of Brillant for every 10,000 liters of water per week.
• As a corrective: apply 100 to 200 ml of Brillant for every 10,000 liters of water.

1. Check that the chlorine and pH levels are adequate.
2. Vacuum the floor before applying Brillant.
3. Brush floor and walls.
4. Apply Brillant by dissolving the product in a bucket of water or directly from the can, distributing it evenly around the entire pool and helping it to dissolve in the water with a maintenance handle or by applying a good portion to the return nozzles (with the filter on).
5. Leave the filter operating for 24 hours if it is corrective or if it is preventive, 6 to 8 continuous hours in residential areas or 18 to 24 hours if it is public or semi-public.
6. Backwash the filter when the pressure rises within 10 psi of its clean pressure (typically backwash at 20 to 25 psi).
7. After 24 hours, vacuum the debris into the drain, brush the walls, and continue your normal filtering schedule with sparkling water.

Brochure download

Maintenance Guide download

Maintenance Log download

Safety data sheet download